Modulating solvated structure of Zn2+ and inducing surface crystallography by a simple organic molecule with abundant polar functional groups to synergistically stabilize zinc metal anodes for long-life aqueous zinc-ion batteries.

Aqueous zinc-ion batteries (AZIBs) have attracted significant attention owing to their inherent security, low cost, abundant zinc (Zn) resources and high energy density. Nevertheless, the growth of zinc dendrites and side reactions on the surface of Zn anodes during repeatedly plating/stripping shorten the cycle life of AZIBs. Herein, a simple organic molecule with abundant polar functional groups, 2,2,2-trifluoroether formate (TF), has been proposed as a high-efficient additive in the ZnSO4 electrolyte to suppress the growth of Zn dendrites and side reaction during cycling. It is found that TF molecules can infiltrate the solvated sheath layer of the hydrated Zn2+ to reduce the number of highly chemically active H2O molecules owing to their strong binding energy with Zn2+. Simultaneously, TF molecules can preferentially adsorb onto the Zn surface, guiding the uniform deposition of Zn2+ along the crystalline surface of Zn(002). This dual action significantly inhibits the formation of Zn dendrites and side reactions, thus greatly extending the cycling life of the batteries. Accordingly, the Zn//Cu asymmetric cell with 2 % TF exhibits stable cycling for more than 3,800 cycles, achieving an excellent average Columbic efficiency (CE) of 99.81 % at 2 mA cm-2/1 mAh cm-2. Meanwhile, the Zn||Zn symmetric cell with 2 % TF demonstrates a superlong cycle life exceeding 3,800 h and 2,400 h at 2 mA cm-2/1 mAh cm-2 and 5 mA cm-2/2.5 mAh cm-2, respectively. Simultaneously, the Zn//VO2 full cell with 2 % TF possesses high initial capacity (276.8 mAh/g) and capacity retention (72.5 %) at 5 A/g after 500 cycles. This investigation provides new insights into stabilizing Zn metal anodes for AZIBs through the co-regulation of Zn2+ solvated structure and surface crystallography.

Blocking the ATR-SerRS-VEGFA pathway targets angiogenesis for UV-induced cutaneous squamous cell carcinoma.

Cutaneous squamous cell carcinoma (cSCC) is the second most prevalent form of skin cancer, with an escalating incidence rate and a notable potential (up to 5%) for metastasis. Ultraviolet radiation (UVA and UVB) exposure is the primary risk factor for cSCC carcinogenesis, with literature suggesting ultraviolet radiation (UVR) promotes vascular endothelial growth factor A (VEGFA) expression. This study aims to investigate UVR-induced upregulation of VEGFA and explore combination therapeutic strategies. The skin squamous cell carcinoma cell line A431 was exposed to specific durations of ultraviolet radiation. The effect of emodin on ATR/SerRS/VEGFA pathway was observed. The cell masses were also transplanted subcutaneously into mice (n = 8). ATR inhibitor combined with emodin was used to observe the growth and angiogenesis of the xenografts. The results showed that UV treatment significantly enhanced the phosphorylation of SerRS and the expression level of VEGFA in A431 cells (p < 0.05). Treatment with emodin significantly inhibited this expression (p < 0.05), and the combination of emodin and ATR inhibitor further enhanced the inhibitory effect (p < 0.05). This phenomenon was further confirmed in the xenograft model, which showed that the combination of ATR inhibitor and emodin significantly inhibited the expression of VEGFA to inhibit angiogenesis (p < 0.05), thus showing an inhibitory effect on cSCC. This study innovatively reveals the molecular mechanism of UV-induced angiogenesis in cSCC and confirms SerRS as a novel target to inhibit cSCC angiogenesis and progression in vitro and in vivo studies.

Predictive value of the inconsistency between the residual and post-PCI QFR for prognosis in PCI patients.

Introduction: To investigate the prognostic value of the consistency between the residual quantitative flow ratio (QFR) and postpercutaneous coronary intervention (PCI) QFR in patients undergoing revascularization. Methods: This was a single-center, retrospective, observational study. All enrolled patients were divided into five groups according to the ΔQFR (defined as the value of the post-PCI QFR minus the residual QFR): (1) Overanticipated group; (2) Slightly overanticipated group; (3) Consistent group; (4) Slightly underanticipated group; and (5) Underanticipated group. The primary outcome was the 5-year target vessel failure (TVF). Results: A total of 1373 patients were included in the final analysis. The pre-PCI QFR and post-PCI QFR were significantly different among the five groups. TVF within 5 years occurred in 189 patients in all the groups. The incidence of TVF was significantly greater in the underanticipated group than in the consistent group (P = 0.008), whereas no significant differences were found when comparing the underanticipated group with the other three groups. Restricted cubic spline regression analysis showed that the risk of TVF was nonlinearly related to the ΔQFR. A multivariate Cox regression model revealed that a ΔQFR≤ -0.1 was an independent risk factor for TVF. Conclusions: The consistency between the residual QFR and post-PCI QFR may be associated with the long-term prognosis of patients. Patients whose post-PCI QFR is significantly lower than the residual QFR may be at greater risk of TVF. An aggressive PCI strategy for lesions is anticipated to have less functional benefit and may not result in a better clinical outcome.

Improving the hydrothermal stability of Al-rich Cu-SSZ-13 zeolite via Pr-ion modification.

Al-rich (Si/Al = 4-6) Cu-SSZ-13 has been recognized as one of the potential catalysts to replace the commercial Cu-SSZ-13 (Si/Al = 10-12) towards ammonia-assisted selective catalytic reduction (NH3-SCR). However, poor hydrothermal stability is a great obstacle for Al-rich zeolites to meet the catalytic applications containing water vapor. Herein, we demonstrate that the hydrothermal stability of Al-rich Cu-SSZ-13 can be dramatically enhanced via Pr-ion modification. Particularly, after high-temperature hydrothermal aging (HTA), CuPr1.2-SSZ-13-HTA with an optimal Pr content of 1.2 wt% exhibits a T80 (temperature window of NO conversion above 80%) window of 225-550 °C and a T90 window of 250-350 °C. These values are superior to those of Cu-SSZ-13-HTA (225-450 °C for T80 and no T90 window). The results of X-ray diffraction Rietveld refinement, electron paramagnetic resonance (EPR) and spectral characterization reveal that Pr ions mainly located in the eight-membered rings (8MRs) in SSZ-13 zeolite can inhibit the generation of inactive CuOx during hydrothermal aging. This finding is further supported by density functional theory (DFT) calculations, which suggest that the presence of Pr ions restrains the transformation from Cu2+ ions in 6MRs into CuOx, resulting in enhanced hydrothermal stability. It is also noted that an excessive amount of Pr ions in Cu-SSZ-13 would result in the production of CuOx that causes the decline of catalytic performance. The present work provides a promising strategy for creating a hydrothermally stable Cu-SSZ-13 zeolite catalyst by adding secondary metal ions.

[Prognosis Analysis of Additional Surgical Treatment for High-Risk T1 Colorectal Cancer Patients After Endoscopic Resection]. / è¿½åŠ å¤–ç§‘æ‰‹æœ¯æ²»ç–—å¯¹é«˜é£Žé™©T1æœŸç»“ç›´è‚ ç™Œå† é•œåˆ‡é™¤æ‚£è€ çš„é¢„åŽå½±å“.

Objective: To analyze the effect of additional surgery on the survival and prognosis of high-risk T1 colorectal cancer patients who have undergone endoscopic resection. Methods: The clinical data of patients with high-risk T1 colorectal cancer were retrospectively collected. The patients were divided into the endoscopic resection (ER) plus additional surgical resection (SR) group, or the ER+SR group, and the ER group according to whether additional SR were performed after ER. Baseline data of the patients and information on the location, size, and postoperative pathology of the lesions were collected. Patient survival-related information was obtained through the medical record system and patient follow-up. The primary outcome indicators were the overall survival and the colorectal cancer-specific survival. Univariate Cox regression analysis was used to screen survival-related risk factors and hazard ratio (HR) was calculated. Multivariate Cox regression analysis was used to analyze the independent influencing factors. Results: The data of 109 patients with T1 high-risk colorectal cancer were collected, with 52 patients in the ER group and 57 patients in the ER+SR group. The mean age of patients in the ER group was higher than that in the ER+SR group (65.21 years old vs. 60.54 years old, P=0.035), and the median endoscopic measurement of the size of lesions in the ER group was slightly lower than that in the ER+SR group (2.00 cm vs. 2.50 cm, P=0.026). The median follow-up time was 30.00 months, with the maximum follow-up time being 119 months, in the ER+SR group and there were 4 patients deaths, including one colorectal cancer-related death. Whereas the median follow-up time in the ER group was 28.50 months, with the maximum follow-up time being 78.00 months, and there were 4 patient deaths, including one caused by colorectal cancer. The overall 5-year cumulative survival rates in the ER+SR group and the ER group were 94.44% and 81.65%, respectively, and the cancer-specific 5-year cumulative survival rates in the ER+SR group and the ER group were 97.18% and 98.06%, respectively. The Kaplan-Meier analysis showed no significant difference in the overall cumulative survival or cancer-specific cumulative survival between the ER+SR and the ER groups. Univariate Cox regression analysis showed that age and the number of reviews were the risk factors of overall survival (HR=1.16 and HR=0.27, respectively), with age identified as an independent risk factor of overall survival in the multivariate Cox regression analysis (HR=1.10, P=0.045). Conclusion: For T1 colorectal cancer patients with high risk factors after ER, factors such as patient age and their personal treatment decisions should not be overlooked. In clinical practice, additional caution should be exercised in decision-making concerning additional surgery.

Construction of a diagnostic model based on random forest and artificial neural network for peri-implantitis.

OBJECTIVES: This study aimed to reveal critical genes regulating peri-implantitis during its development and construct a diagnostic model by using random forest (RF) and artificial neural network (ANN). METHODS: GSE-33774, GSE106090, and GSE57631 datasets were obtained from the GEO database. The GSE33774 and GSE106090 datasets were analyzed for differential expression and functional enrichment. The protein-protein interaction networks (PPI) and RF screened vital genes. A diagnostic model for peri-implantitis was established using ANN and validated on the GSE33774 and GSE57631 datasets. A transcription factor-gene interaction network and a transcription factor-micro-RNA (miRNA) regulatory network were also established. RESULTS: A total of 124 differentially expressed genes (DEGs) involved in the regulation of peri-implantitis were screened. Enrichment analysis showed that DEGs were mainly associated with immune receptor activity and cytokine receptor activity and were mainly involved in processes such as leukocyte and neutrophil migration. The PPI and RF screened six essential genes, namely, CD38, CYBB, FCGR2A, SELL, TLR4, and CXCL8. The receiver operating characteristic curve (ROC) indicated that the ANN model had an excellent diagnostic performance. FOXC1, GATA2, and NF-κB1 may be essential transcription factors in peri-implantitis, and hsa-miR-204 may be a key miRNA. CONCLUSIONS: The diagnostic model of peri-implantitis constructed by RF and ANN has high confidence, and CD38, CYBB, FCGR2A, SELL, TLR4, and CXCL8 are potential diagnostic markers. FOXC1, GATA2, and NF-κB1 may be essential transcription factors in peri-implantitis, and hsa-miR-204 plays a vital role as a critical miRNA.

Heterogeneous-Structured Molybdenum Diboride as a Novel and Promising Anode for Lithium-Ion Batteries.

With the development of electric vehicles, exploiting anode materials with high capacity and fast charging capability is an urgent requirement for lithium-ion batteries (LIBs). Borophene, with the merits of high capacity, high electronic conductivity and fast diffusion kinetics, holds great potential as anode for LIBs. However, it is difficult to fabricate for the intrinsic electron-deficiency of boron atom. Herein, heterogeneous-structured MoB2 (h-MoB2 ) with amorphous shell and crystalline core, is prepared by solid phase molten salt method. As demonstrated, crystalline core can encapsulate the honeycomb borophene within two adjacent Mo atoms, and amorphous shell can accommodate more lithium ions to strengthen the lithium storage capacity and diffusion kinetics. According to theoretical calculations, the lithium adsorption energy in MoB2 is about -2.7 eV, and the lithium diffusion energy barrier in MoB2 is calculated to be 0.199 eV, guaranteeing the enhanced adsorption capability and fast diffusion kinetic behavior of Li+ ions. As a result, h-MoB2 anode presents high capacity of 798 mAh g-1 at 0.1 A g-1 , excellent rate performance of 183 mAh g-1 at 5 A g-1 and long-term cyclic stability for 1200 cycles. This work may inspire ideas for the fabrication of borophene analogs and two-dimensional metal borides.

Heterogeneous engineering and carbon confinement strategy to synergistically boost the sodium storage performance of transition metal selenides.

Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.

Rod-like Ni-CoS2@NC@C: Structural design, heteroatom doping and carbon confinement engineering to synergistically boost sodium storage performance.

Currently, conversion-type transition metal sulfides have been extensively favored as the anodes for sodium-ion batteries due to their excellent redox reversibility and high theoretical capacity; however, they generally suffer from large volume expansion and structural instability during repeatedly Na+ de/intercalation. Herein, spatially dual-confined Ni-doped CoS2@NC@C microrods (Ni-CoS2@NC@C) are developed via structural design, heteroatom doping and carbon confinement to boost sodium storage performance of the material. The morphology of one-dimensional-structured microrods effectively enlarges the electrode/electrolyte contact area, while the confinement of dual-carbon layers greatly alleviates the volume change-induced stress, pulverization, agglomeration of the material during charging and discharging. Moreover, the introduction of Ni improves the electrical conductivity of the material by modulating the electronic structure and enlarges the interlayer distance to accelerate Na+ diffusion. Accordingly, the as-prepared Ni-CoS2@NC@C exhibits superb electrochemical properties, delivering the satisfactory cycling performance of 526.6 mA h g-1 after 250 cycles at 1 A g-1, excellent rate performance of 410.9 mA h g-1 at 5 A g-1 and superior long cycling life of 502.5 mA h g-1 after 1,500 cycles at 5 A g-1. This study provides an innovative idea to improve sodium storage performance of conversion-type transition metal sulfides through the comprehensive strategy of structural design, heteroatom doping and carbon confinement.

Heating and cooling supply estimation to control buildings temperature using resistor-capacitor thermal model, unscented kalman filter, and nonlinear least square method.

Buildings can have varying heating and cooling set points to take advantage of favorable environmental conditions and low time-of-use rates. To optimize temperature scheduling and energy planning, building energy managements need reliable building thermal models and efficient estimation methods to accurately estimate space heating and cooling supply (or power demand) over a certain period (e.g., 24 h). This accurate estimation capability is vital for performing temperature control strategies. Therefore, the present study used resistor-capacitor (RC) models and unscented Kalman filter (UKF) integrated with nonlinear least square (NLS) to develop a method for precisely estimating heating and cooling supply to control zone temperature. To evaluate the capability of the method, two case studies are conducted. The first case study involves a made-up simple RC model, while the second case study uses monitored data from a single detached house in different scenarios. The capability of the method is evaluated by applying the estimated heating and cooling supply to the RC thermal model and simulated zone temperatures. Then, assess whether the controlled zone's temperature meets the expected temperature or not. The performance evaluation shows that the developed method can accurately estimate the heating and cooling supply, validating its applicability to temperature control objectives. Practical Application: This research provides a valuable contribution to modern building industry professionals by offering a precise method for estimating heating and cooling supply for temperature control in buildings. By equipping practitioners with an effective tool to optimize energy management, this study addresses a critical aspect of building performance. The practical case studies demonstrate the versatility and applicability of this approach in real-world scenarios. In a world increasingly prioritizing energy efficiency and sustainability, this research empowers professionals to make informed decisions, enhance building performance, and contribute to a greener and more sustainable future, all within a concise and actionable framework.

Selective activation of MoS2 grain boundaries for enhanced electrochemical activity.

Molybdenum disulfide (MoS2) has emerged as a promising material for catalysis and sustainable energy conversion. However, the inertness of its basal plane to electrochemical reactions poses challenges to the utilization of wafer-scale MoS2 in electrocatalysis. To overcome this limitation, we present a technique that enhances the catalytic activity of continuous MoS2 by preferentially activating its buried grain boundaries (GBs). Through mild UV irradiation, a significant enhancement in GB activity was observed that approaches the values for MoS2 edges, as confirmed by a site-selective photo-deposition technique and micro-electrochemical hydrogen evolution reaction (HER) measurements. Combined spectroscopic characterization and ab-initio simulation demonstrates substitutional oxygen functionalization at the grain boundaries to be the origin of this selective catalytic enhancement by an order of magnitude. Our approach not only improves the density of active sites in MoS2 catalytic processes but yields a new photocatalytic conversion process. By exploiting the difference in electronic structure between activated GBs and the basal plane, homo-compositional junctions were realized that improve the photocatalytic synthesis of hydrogen by 47% and achieve performances beyond the capabilities of other catalytic sites.

Is the interspinous process device safe and effective in elderly patients with lumbar degeneration? A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND CONTEXT: Lumbar spinal stenosis is one of the most common diseases affecting the elderly that is characterized by the narrowing of the spinal canal and peripheral neural pathways which may cause back pain and neurogenic intermittent claudication in affected patients. Recently, as an alternative treatment between conservative therapy and decompression surgery, interspinous process device (IPD) such as X-stop, Coflex, DIAM, Aperius, Wallis, etc., has gained enough popularity. PURPOSE: The purpose of this study was to evaluate the efficacy and safety of IPD in the treatment of degenerative lumbar spinal stenosis compared with decompression surgery. STUDY DESIGN: This study was a systematic review and meta-analysis of randomized controlled trials. PATIENT SAMPLE: 555 patients' samples were collected for this study. OUTCOME MEASURES: The Visual Analogue Scale and the Oswestry Disability Index were analyzed, as well as the Zurich Claudication Questionnaire For efficacy evaluation. Complication and reoperation rate was utilized for the assessment of safety. METHODS: A comprehensive literature search was performed through Pubmed, EMBASE, Web of Science, and Cochrane Library until October 2023. Among the studies meeting the eligible criteria, any study in which IPD was utilized in the treatment of degenerative lumbar spinal stenosis was included in the current review. For efficacy evaluation, the Visual Analogue Scale and the Oswestry Disability Index were analyzed, as well as the Zurich Claudication Questionnaire. Complication and reoperation rates were utilized for the assessment of safety. RESULTS: Five randomized controlled trials with 555 patients were included. There were no significant differences in VAS leg pain (SMD - 0.08, 95% CI - 0.32 to 0.15) and back pain (SMD 0.09, 95%CI-0.27 to 0.45), ODI scores (MD 1.08, 95% CI - 11.23 to 13.39) and ZCQ physical function (MD-0.09, 95% CI-0.22 to 0.05) for IPD compared with decompression surgery. In terms of ZCQ symptom severity (MD - 0.22, 95% CI - 0.27 to - 016), decompression surgery showed superior to the IPD. As for complications (RR 1.08, 95% CI 0.36 to 3.27), the IPD had no advantages compared to decompression surgery, whereas inferior to it in reoperation rate (RR 2.58, 95% CI 1.67 to 3.96). CONCLUSIONS: This systematic review and meta-analysis indicated no superiority in the clinical outcome for IPD compared with decompression surgery. However, more clinical studies are warranted to determine the efficacy and safety of IPD.

The reduction of microglial efferocytosis is concomitant with depressive-like behavior in CUMS-treated mice.

BACKGROUND: Microglial efferocytosis plays a crucial role in facilitating and sustaining homeostasis in the central nervous system, and it is involved in neuropsychiatric disorders. How microglial efferocytosis is affected under the condition of major depressive disorder (MDD) remains elusive. In this study, we hypothesized that microglial efferocytosis in the hippocampus is impaired in the chronic unpredicted mild stress (CUMS) model of MDD, which is involved in the development of MDD. METHOD: Depressive-like behavior in adult male mice was induced by CUMS and confirmed by behavioral tests. Microglial efferocytosis was evaluated using immunofluorescence staining of hippocampal slices and primary microglia co-cultured with apoptotic cells. The protein and mRNA levels of phagocytosis-related molecules and inflammation-related cytokines were detected using western blotting and RT-qPCR, respectively. Annexin V was injected to mimic impairment of microglial efferocytosis. TREM2-siRNA was further used on primary microglia to examine efferocytosis-related signaling pathways. RESULTS: Microglia were activated and the expression of proinflammatory cytokines was increased in CUMS mice, while microglial efferocytosis and efferocytosis-related molecules were decreased. Inhibition of the TREM2/Rac1 pathway impaired microglial efferocytosis. Annexin V injection inhibited microglial efferocytosis, increased inflammation in the hippocampus and depressive-like behavior. LIMITATIONS: The potential antidepressant effect of the upregulation of the TREM2/Rac1 pathway was not evaluated. CONCLUSIONS: Impairment of microglial efferocytosis is involved in the development of depressive-like behavior, with downregulation of the TREM2/Rac1 pathway and increased inflammation. These results may increase our understanding of the pathophysiological mechanisms associated with MDD and provide novel targets for therapeutic interventions.

Optimizing Interplanar Spacing, Oxygen Vacancies and Micromorphology via Lithium-Ion Pre-Insertion into Ammonium Vanadate Nanosheets for Advanced Cathodes in Aqueous Zinc-Ion Batteries.

Ammonium vanadates, featuring an N─H···O hydrogen bond network structure between NH4 + and V─O layers, have become popular cathode materials for aqueous zinc-ion batteries (AZIBs). Their appeal lies in their multi-electron transfer, high specific capacity, and facile synthesis. However, a major drawback arises as Zn2+ ions tend to form bonds with electronegative oxygen atoms between V─O layers during cycling, leading to irreversible structural collapse. Herein, Li+ pre-insertion into the intermediate layer of NH4 V4 O10 is proposed to enhance the electrochemical activity of ammonium vanadate cathodes for AZIBs, which extends the interlayer distance of NH4 V4 O10 to 9.8 Å and offers large interlaminar channels for Zn2+ (de)intercalation. Moreover, Li+ intercalation weakens the crystallinity, transforms the micromorphology from non-nanostructured strips to ultrathin nanosheets, and increases the level of oxygen defects, thus exposing more active sites for ion and electron transport, facilitating electrolyte penetration, and improving electrochemical kinetics of electrode. In addition, the introduction of Li+ significantly reduces the bandgap by 0.18 eV, enhancing electron transfer in redox reactions. Leveraging these unique advantages, the Li+ pre-intercalated NH4 V4 O10 cathode exhibits a high reversible capacity of 486.1 mAh g-1 at 0.5 A g-1 and an impressive capacity retention rate of 72% after 5,000 cycles at 5 A g-1 .

A hidden phase uncovered by ultrafast carrier dynamics in thin Bi2O2Se.

Bi2O2Se has attracted intensive attention due to its potential in electronics, optoelectronics, and ferroelectric applications. Despite that, there have only been a handful of experimental studies based on ultrafast spectroscopy to elucidate the carrier dynamics in Bi2O2Se thin films. Besides, different groups have reported various ultrafast timescales and associated mechanisms across films of different thicknesses. A comprehensive understanding in relation to thickness and fluence is still lacking. In this work, we have systematically explored the thickness-dependent Raman spectroscopy and ultrafast carrier dynamics in chemical vapor deposition (CVD)-grown Bi2O2Se thin films on a mica substrate with thicknesses varying from 22.44 nm down to 4.62 nm in both low and high pump fluence regions. Combining the thickness dependence and fluence dependence of the slow decay time, we demonstrate a hidden photoinduced ferroelectric transition in the thinner (<8 nm) Bi2O2Se films below the material damage thresholds, influenced by substrate-induced compressive strain and far-from-equilibrium excitation. Moreover, this transition can be manifested at high electronic excitation densities. Our results deepen the understanding of the interplay between the ferroelectric phase and semiconducting characteristics of Bi2O2Se thin films, offering potential applications in optoelectronic devices that benefit from the ferroelectric transition.

Exploring the potential link between MitoEVs and the immune microenvironment of periodontitis based on machine learning and bioinformatics methods.

BACKGROUND: Periodontitis is a chronic inflammatory condition triggered by immune system malfunction. Mitochondrial extracellular vesicles (MitoEVs) are a group of highly heterogeneous extracellular vesicles (EVs) enriched in mitochondrial fractions. The objective of this research was to examine the correlation between MitoEVs and the immune microenvironment of periodontitis. METHODS: Data from MitoCarta 3.0, GeneCards, and GEO databases were utilized to identify differentially expressed MitoEV-related genes (MERGs) and conduct functional enrichment and pathway analyses. The random forest and LASSO algorithms were employed to identify hub MERGs. Infiltration levels of immune cells in periodontitis and healthy groups were estimated using the CIBERSORT algorithm, and phenotypic subgroups of periodontitis based on hub MERG expression levels were explored using a consensus clustering method. RESULTS: A total of 44 differentially expressed MERGs were identified. The random forest and LASSO algorithms identified 9 hub MERGs (BCL2L11, GLDC, CYP24A1, COQ2, MTPAP, NIPSNAP3A, FAM162A, MYO19, and NDUFS1). ROC curve analysis showed that the hub gene and logistic regression model presented excellent diagnostic and discriminating abilities. Immune infiltration and consensus clustering analysis indicated that hub MERGs were highly correlated with various types of immune cells, and there were significant differences in immune cells and hub MERGs among different periodontitis subtypes. CONCLUSION: The periodontitis classification model based on MERGs shows excellent performance and can offer novel perspectives into the pathogenesis of periodontitis. The high correlation between MERGs and various immune cells and the significant differences between immune cells and MERGs in different periodontitis subtypes can clarify the regulatory roles of MitoEVs in the immune microenvironment of periodontitis. Future research should focus on elucidating the functional mechanisms of hub MERGs and exploring potential therapeutic interventions based on these findings.

Visualization of the Active Sites of Zinc-Chromium Oxides and the CO/H2 Activation Mechanism in Direct Syngas Conversion.

Despite wide studies demonstrating the versatility of the metal oxide-zeolite (OXZEO) catalyst concept to tackle the selectivity challenge in syngas chemistry, the active sites of metal oxides and the mechanism of CO/H2 activation remain to be elucidated. Herein, we demonstrate experimentally the role of Cr in zinc-chromium oxides and unveil visually, for the first time, the active sites for CO activation employing scanning transmission electron microscopy-electron energy loss spectroscopy using the volumetric density of surface carbon species as a descriptor. The ZnCr2O4 spinel surface with atomic ZnOx overlayer is the most active site for C-O bond dissociation, particularly at the narrow ZnCr2O4(110) facets constrained between the (311) and (111) facets, followed by the Cr-doped wurtzite ZnO surface. In comparison, the surfaces of ZnCr2O4 with aggregated ZnOx overlayers, pure ZnO, and the stoichiometric ZnCr2O4 exhibit a significantly lower activity. In situ synchrotron-based vacuum ultraviolet photoionization mass spectrometric study on different temperature programmed surface reactions with isotopes of C18O, 13CO, and D2 validates direct CO dissociation over ZnCrn oxides in CO, forming CH2 and further to hydrocarbons if H2 is present and CH2CO intermediates in syngas. The activity of CO dissociation and hydrogenation over ZnCrn oxides correlates well with the syngas-to-light-olefins activity of ZnCrn-SAPO-18 composite catalysts as a function of the Cr/Zn ratio.

Mechanical morphotype switching as an adaptive response in mycobacteria.

Invading microbes face a myriad of cidal mechanisms of phagocytes that inflict physical damage to microbial structures. How intracellular bacterial pathogens adapt to these stresses is not fully understood. Here, we report the discovery of a virulence mechanism by which changes to the mechanical stiffness of the mycobacterial cell surface confer refraction to killing during infection. Long-term time-lapse atomic force microscopy was used to reveal a process of "mechanical morphotype switching" in mycobacteria exposed to host intracellular stress. A "soft" mechanical morphotype switch enhances tolerance to intracellular macrophage stress, including cathelicidin. Both pharmacologic treatment, with bedaquiline, and a genetic mutant lacking uvrA modified the basal mechanical state of mycobacteria into a soft mechanical morphotype, enhancing survival in macrophages. Our study proposes microbial cell mechanical adaptation as a critical axis for surviving host-mediated stressors.

Effect of duloxetine on pain and opioid consumption after total knee and hip arthroplasty: a systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Although duloxetine has shown a positive effect on pain relief with hip and knee osteoarthritis, there is no pooled analysis of duloxetine for pain relief and opioid consumption in patients after total hip or knee arthroplasty. AIM: This systematic review and meta-analysis aimed to analyze pain control, opioid consumption, and associated adverse events of perioperative administration of duloxetine after total hip or knee arthroplasty. METHOD: After being registered with PROSPERO (CRD42022323202), the databases of MEDLINE, PubMed, Embase, Web of Science, Cochrane Library, and ClinicalTrials.gov were searched from inception until March 20, 2023, for randomized controlled trials (RCTs). Primary outcomes were the visual Analog Scale (VAS) pain scores at rest (rVAS) and upon ambulation (aVAS). Secondary outcomes were postoperative opioid consumption quantified as oral morphine milligram equivalents (MMEs) and adverse effects of duloxetine. RESULTS: Nine RCTs with 806 cases were included. Duloxetine was associated with lower VAS scores at different times after surgery (24 h, two weeks, and ≥ 3 months). Compared to placebo, perioperative daily duloxetine use significantly reduced daily opioid MMEs at 24 h (standard mean deviation [SMD] -0.71, 95% confidence interval [95% CI] -1.19 to -0.24, P = 0.003), three days (SMD -1.10, 95% CI -1.70 to -0.50, P = 0.0003), and one week (SMD -1.18, 95% CI -1.99 to -0.38, P = 0.004) after surgery. The duloxetine group had a significantly lower rate of nausea (odds ratio 0.62, 95% CI [0.41 to 0.94], P = 0.02) and a higher rate of drowsiness and somnolence (odds ratio 1.87, 95% CI [1.13 to 3.07], P = 0.01) compared to the placebo group. No significant differences were observed in the rates of other adverse events. CONCLUSION:  Perioperative duloxetine significantly decreased postoperative pain and opioid consumption with good safety profiles. Further high quality designed and well-controlled randomized trials are warranted.

Unveiling the Quantitative Relationships between Electron Distribution and Steric Hindrance of Organic Amines and Their Reaction Rates with Carbonyl Sulfur: A Theoretical Calculation Investigation.

The removal of carbonyl sulfide (COS) commonly contained in natural gas is of great significance but still very challenging via a widely employed absorption process due to its low reactivity and solubility in various commercial solvents. Artificial intelligence (AI) is playing an increasingly important role in the exploration of desulfurization solvents. However, practically feasible AI models still lack a thorough understanding of the reaction mechanisms. Machine learning (ML) models established on chemical mechanisms exhibit enhanced chemical interpretability and prediction performance. In this study, we constructed a series of solvent molecules with varying functional groups, including linear aliphatic amines, cyclic aliphatic amines, and aromatic amines and proposed a three-step reaction pathway to dissect the effects of charge and steric hindrance of different substituents on their reaction rates with COS. Chemical descriptors, based on electrostatic potential (ESP), average local ionization energy (ALIE) theory, Hirshfeld charges, and Fukui functions, were used to correlate and predict the electrophilic reactivity of amine groups with COS. Substituents influence the reaction rate by changing the attraction interaction of amine groups to COS molecules and the electron rearrangement in the electrophilic reaction. Furthermore, they have more pronounced steric effects on the reaction rate in the linear amines. The descriptors N_ALIE and q(N) were found to be crucial in predicting the reactivity of amine groups with COS. Present study provides a comprehensive understanding of the reaction mechanisms of COS with amine compounds, offers specific chemical principles for the development of chemistry-driven ML models, sheds light on other types of electrophilic reactions occurring on amine and phosphine groups, and guides the development of chemical solvents in gas absorption processes.